Torque Unit Converter: N·m, lb-ft, lb-in and kgf·m
Convert torque between N·m, lb-ft, lb-in and kgf·m. Learn the conversion factors, work through examples like 350 lb-ft to N·m, and avoid mix-ups in repair talk.

Contents
- What a torque unit converter does
- lb-ft to N·m and the reverse
- Working through a ft lb to newton meter conversion
- Handling smaller units: lb-in and kg-cm
- kgf·m to N·m and kilogram-force basics
- Using the converter in a repair discussion
- Mistakes that spoil torque conversions
- Torque conversion questions answered
- How do I convert lb ft to nm?
- What is the lb ft to nm conversion factor?
- How does a torque unit converter kg cm to nm work?
- How many nm is 350 lb ft?
- Is kgm to nm the same as kg-cm to nm?
A torque unit converter changes a tightening or fastener spec from one measuring system into another, so a value written in lb-ft can be read and applied in N·m. The conversion works by multiplying the stated value by a fixed factor that links the two units. This article gives the factors for N·m, lb-ft, lb-in and kgf·m and shows how to use them.
- One pound-foot equals about 1.3558 newton-meters, the factor used for lb-ft to N·m conversion.
- One newton-meter equals about 0.7376 pound-feet, so N·m to lb-ft divides the value instead of multiplying it.
- Pound-inches and kilogram-centimeters convert to newton-meters by smaller factors, and kgf·m uses a factor near 9.807.
- Write the unit next to every number in a repair discussion, because lb-ft, lb-in and kgf·m are easy to mix up.
What a torque unit converter does
A torque unit converter rewrites a turning force from one unit system into another without changing the real tightening effort. Torque measures how hard a fastener is twisted around an axis, so the unit tracks both force and distance from that axis. A torque conversion factor is the fixed number that links two units of this measure.
The metric family uses the newton-meter, written N·m, where force in newtons acts at a distance in meters. The imperial family uses the pound-foot, written lb-ft, where pounds of force act at a distance in feet. Both describe the same physical twist, which is why a factor can move a value between them.
A conversion changes the number and the unit label together, never the number alone. A spec read as 100 in the wrong unit can mean a very different tightness at the fastener. Name the unit beside every value when you pass torque figures to a service provider.
lb-ft to N·m and the reverse
The lb-ft to N·m direction multiplies the pound-foot value by roughly 1.3558 to get newton-meters. This factor comes from one pound of force and one foot of distance, each converted into metric. A foot-pound to newton-meter conversion uses the same number, because the two names describe one unit.
The reverse direction, N·m to ft lbs, divides the newton-meter value by that factor, which is the same as multiplying by about 0.7376. A torque unit converter nm to ft lbs step therefore gives a smaller number than the metric input. Running the factor backward and forward returns the starting value, which makes a quick check easy.
For a stated case, 350 lb ft to nm conversion means 350 times about 1.3558, which lands near 474.5 newton-meters. The same arithmetic applies to any foot lb to nm conversion, whether the figure comes from a manual, a label or a note. Round the result to the precision the tool or spec allows.
| From | To | Do this |
|---|---|---|
| lb-ft | N·m | multiply by about 1.3558 |
| N·m | lb-ft | multiply by about 0.7376 |
| lb-in | N·m | multiply by about 0.113 |
| kgf·m | N·m | multiply by about 9.807 |
Working through a ft lb to newton meter conversion
A ft pound to newton meter conversion starts by confirming that the figure is truly in pound-feet and not pound-inches. The labels lb-ft and lb-in differ by a factor of twelve, so a misread unit changes the answer a great deal. Check the manual or label before you multiply.
Take a value of 80 lb-ft as a worked case. Multiply 80 by about 1.3558 to reach roughly 108.5 N·m, then round to the nearest whole number if the spec allows. A lb ft to nm calculator performs exactly this step and shows the unit with the result.
Use a lb ft to nm conversion factor of about 1.3558 for every value in this direction. The lb ft to nm conversion factor stays fixed because it links defined units, not a particular tool or fastener. State the factor you used when you share the result, so the other person can repeat the arithmetic.
Handling smaller units: lb-in and kg-cm
Pound-inches measure small torque values and convert to newton-meters with a factor of about 0.113. A torque unit converter in lbs to nm sometimes appears in searches where the user means pound-inches, so confirm the scale first. Small fasteners on covers and trim often carry pound-inch specs.
Kilogram-centimeters, written kg-cm, also cover small values and convert to newton-meters with a factor of about 0.0981. A torque unit converter kg cm to nm operation multiplies the kg-cm figure by that number. The kilogram here is a mass, so the factor includes gravity, which is why it is not a clean tenth.
Keep the small units apart from the large ones in your notes. A pound-inch figure and a pound-foot figure look similar in a list but describe very different tightening effort. Label every row with its unit before you compare specs side by side.
kgf·m to N·m and kilogram-force basics
The kilogram-force meter, written kgf·m, converts to newton-meters by multiplying by about 9.807. A torque unit converter kgm to nm step uses this same factor when kgm stands for kilogram-force meters. The factor reflects the pull of gravity on one kilogram of mass.
Kilogram-force is not a metric SI unit, and the newton is the preferred force unit in that system. Some equipment labels and older documents still print kgf·m, so the conversion stays useful in repair talk. Treat the kgf·m value as a legacy label and translate it before you share it.
Do not confuse kilogram-force meters with kilogram-centimeters. The two differ by a factor of one hundred, so a kg-cm value read as kgf·m would misstate the torque badly. Write the full unit name in your notes to prevent that swap.
Using the converter in a repair discussion
A repair discussion goes smoother when both sides quote torque in the same unit and name it clearly. Write the value, the unit and the source of the spec in one line for each fastener. An online torque calculator can produce the converted figure, and you record which factor it applied.
A torque converter tool helps when a manual lists metric values and your wrench reads imperial, or the reverse. Convert the spec once, note both numbers, and keep the original visible for reference. The torque calculator result supports the conversation and does not replace the manufacturer spec.
Torque settings protect parts and people, so a value you are unsure about belongs with a trained technician. Ask the service provider to confirm the spec before any fastener is tightened. The converter supports that check and does not authorize a setting on its own.
Mistakes that spoil torque conversions
Multiplying when the direction calls for division is the first error to watch in torque work. The lb-ft to N·m direction multiplies, while N·m to lb-ft divides or multiplies by the smaller factor. Mark the direction of each conversion in your notes before you calculate.
Dropping the unit label is the second error, because a bare number cannot be checked later. A figure of 350 means little until it reads 350 lb-ft or 350 N·m. Carry the unit through every step, including the final answer you hand over.
Rounding too early is the third error, since each rounding step shifts the result. Keep the full factor through the arithmetic and round only the final figure. A second pass in the opposite direction confirms that the answer is consistent.
Torque conversion questions answered
How do I convert lb ft to nm?
Multiply the pound-foot value by about 1.3558 to get newton-meters. For example, 350 lb-ft becomes roughly 474.5 N·m. Keep the unit with the result so the figure can be checked later.
What is the lb ft to nm conversion factor?
The lb ft to nm conversion factor is about 1.3558, and it comes from converting one pound of force and one foot of distance into metric units. The reverse factor is about 0.7376 for newton-meters to pound-feet. Both factors are fixed because they link defined units.
How does a torque unit converter kg cm to nm work?
A torque unit converter kg cm to nm multiplies the kilogram-centimeter value by about 0.0981. The kilogram is a mass, so the factor includes the pull of gravity. Confirm the unit is kg-cm and not kgf·m before you calculate.
How many nm is 350 lb ft?
A 350 lb ft value equals roughly 474.5 N·m when multiplied by about 1.3558. Round the answer to the precision the spec or tool allows. State the factor you used so another person can repeat the arithmetic.
Is kgm to nm the same as kg-cm to nm?
No, kgm to nm and kg-cm to nm use different factors because the units differ by a factor of one hundred. Kilogram-force meters multiply by about 9.807, while kilogram-centimeters multiply by about 0.0981. Check which unit your document prints before converting.