Synthetic vs Conventional Oil Filter Differences

Compare synthetic and conventional oil filters by media, micron rating, bypass valve and change interval so you can plan the filter line on your service estimate.

3 min read1 viewsSynthetic vs Conventional Oil Filter Differences
— · 0 votes
Contents
  1. What the filter media does
  2. Micron rating and what it traps
  3. Bypass valve and change interval
  4. Questions about oil filter differences
  5. Is a synthetic oil filter worth it over a conventional one?
  6. Can I use a synthetic oil filter with conventional oil?
  7. How does the filter bypass valve affect filtration?
  8. Should the oil filter be changed with every oil change?

The synthetic vs conventional oil filter difference comes down to the filter media, the micron rating it can hold and how the bypass valve is set for the oil and engine. A synthetic filter uses finer media that traps smaller particles, while a conventional filter uses cellulose media with wider passages. Neither type changes the oil itself, so the filter must match the oil change interval and the engine's flow needs.

What the filter media does

Oil filter media is the material that traps wear particles as oil passes through it. Synthetic media is built from manufactured fibers that form a tighter, more uniform mesh than cellulose paper. A conventional filter uses treated wood pulp paper with wider gaps between fibers. The tighter mesh catches finer debris but can restrict flow if the filter is undersized for the engine.

Micron rating and what it traps

A filter micron rating describes the particle size the media captures at a stated efficiency. Synthetic filters carry a lower micron rating, so they hold particles that conventional media lets pass. Metal wear particles in that fine range cause more bearing and ring damage over time. The rating depends on the test method, so compare filters only when the rating is stated the same way.

Bypass valve and change interval

The filter bypass valve opens when the media clogs or the oil is cold and thick, letting unfiltered oil reach the engine. A synthetic filter holds more dirt before it loads up, so the bypass opens later in the drain interval. Convention (sic) filters load faster and can send oil around the media sooner. Match the filter to the oil change interval your engine maker specifies, and change the filter with the oil.

Questions about oil filter differences

Is a synthetic oil filter worth it over a conventional one?

A synthetic oil filter is worth it when the engine runs a long drain interval or uses full synthetic oil. The finer media keeps trapping fine particles after a cellulose filter has loaded up. For a short interval with conventional oil, a conventional filter meets the flow and filtration needs of that service. The deciding factors are the oil type, the drain interval and the engine maker's filter specification.

Can I use a synthetic oil filter with conventional oil?

Yes, a synthetic oil filter works with conventional oil because the media filters whatever oil flows through it. The filter does not require synthetic oil to function. Pairing a finer filter with conventional oil gains little if the oil is drained on a short schedule. Follow the filter and oil specifications the engine maker lists for your engine.

How does the filter bypass valve affect filtration?

The filter bypass valve protects oil flow by opening when the media is clogged or the oil is too thick to pass. Open bypass means unfiltered oil reaches the bearings until conditions return to normal. A synthetic filter loads more slowly, so the valve stays closed for more of the drain interval. A stuck or wrong-rated bypass valve can starve the engine, so a trained technician should check it.

Should the oil filter be changed with every oil change?

Yes, the oil filter should be changed with the oil change because the media holds trapped debris and cannot be cleaned. A loaded filter forces the bypass valve open and sends dirty oil back to the engine. A filter left in place also carries old oil that mixes with the fresh fill. The engine maker sets the interval, and the filter type should match that interval.

Latest articles