Automotive Sandpaper Grits Explained and Grit Chart

Understand automotive sandpaper grits, read a grit chart from coarse to fine, and pick the right grit for body work, primer, paint and clear coat.

3 min read1 viewsAutomotive Sandpaper Grits Explained and Grit Chart
— · 0 votes
Contents
  1. Reading the grit number
  2. Grits for body work stages
  3. Building a grit chart for your job
  4. Questions about automotive sandpaper grits
  5. What are grits in sandpaper?
  6. What grit sandpaper should I use for auto body work?
  7. Is there an automotive sandpaper grit chart for paint and primer?
  8. How do I move through the grits when removing scratches?

Automotive sandpaper grits are explained here as a simple step from coarse to fine, with a grit chart that shows where each number fits in body work. The page answers what grits in sandpaper are, which grit suits each stage, and how to move through a scratch removal sanding sequence without skipping steps.

Reading the grit number

A sandpaper grit number states how many abrasive particles sit in a measured area, so a low number cuts fast and a high number polishes smooth. Coarse versus fine grit follows that number in one direction, and the gap between neighboring grits widens as the numbers grow. Grit numbers between brands are not identical, so test a small area before you sand a whole panel. The abrasive type also matters, and aluminum oxide sandpaper and silicon carbide abrasive behave differently on paint and metal.

Grits for body work stages

Auto body sandpaper grits are chosen by the stage of the repair, not by a single rule for the whole job. Coarse to fine grits for bodywork start around P80 for shaping filler and move up as the surface gets closer to paint. Sanding paint and primer needs a finer step than stripping and shaping, and feathering edges keeps the repair blended into the panel. Jumping from a coarse grit to a very fine one leaves deep scratches that show after paint.

Building a grit chart for your job

An automotive sandpaper grit chart lists the grits in order so you can plan a scratch removal sanding sequence before you start. A workable chart runs from the coarse grit that removes damage to the fine grit that prepares for primer and paint, with each step removing the scratches of the one before. Write the grits you used on the panel so a later repair starts from a known surface. The right chart depends on the coating, the tool and the finish you want, so treat any chart as a guide.

Questions about automotive sandpaper grits

What are grits in sandpaper?

Grits in sandpaper are the numbered abrasive particles that do the cutting, so the grit number tells you how aggressively the paper works. A low grit number means larger particles and faster removal, while a high grit number means finer particles and a smoother surface. The number is a scale rather than a measurement of depth, so each grit leaves its own scratch pattern. Matching the grit to the stage of the job is what keeps the finish even.

What grit sandpaper should I use for auto body work?

Auto body work starts with a coarse grit for shaping filler or removing heavy damage and moves through finer grits before primer. Sanding paint and primer calls for a finer step than the shaping stage, and feathering edges needs a grit that blends the repair into the surrounding panel. The grit you start with depends on the coating and the damage, not on one fixed number. Test on a small area and step through the grits in order.

Is there an automotive sandpaper grit chart for paint and primer?

An automotive paint sandpaper grit chart orders the grits from coarse to fine so each step removes the scratches of the previous one. Automotive paint sandpaper grits for primer sit coarser than the grits used to prepare a finish for topcoat. The exact grit at each step depends on the coating, the sanding tool and the finish you want. Keep a note of the grits you used so the next stage starts from a known surface.

How do I move through the grits when removing scratches?

Scratch removal sanding sequence works by stepping from a coarse grit that cuts out the damage to finer grits that erase the scratches left behind. Each grit should remove the scratch pattern of the grit before it, and skipping a step leaves deep marks that show through paint. Feathering edges with the finer grits blends the repair into the panel. A trained technician handles any sanding that goes through a coating to bare metal or near a body feature.

Latest articles